EAGL-3 Series
Machine Control Systems Laser Transmitters

Features: 
From super-steep slopes to long range level-only we offer a line of rugged, easy-to-use laser transmitters. Each features:

• Electronic self-leveling for consistent accuracy and performance in high ground vibration and windy environments.
• Long range laser beam for maximum utilization from a single setup.
• Ruggedly designed and manufactured to withstand harsh jobsite conditions.
• Multiple power sources including on-board, rechargeable batteries.

The easy solution for your toughest site control problems. Long range beam, steep slope operation in both axes, battery operated, easy-to-use...

1. Optional Alignment Scope mounts to permanent Sighting Grooves over either grade axis.

2. Carrying handle.

3. Totally enclosed system protects it from the environment.

4. Cross-Slope Control Panel.

5. Main Control panel.

6. Recharging / 12 volt DC power connector.

7. Fine adjusting Tangent Base for fast and precise grade alignment. Mounts to 5/8 x 11", 3.5" x 8 and domed tripods.

8. Battery pack can be recharged in the unit and easily removed. Provides up to 15 hours operation.

Steep-Slope Control: The EAGL-3 lets you set and forget slopes from negative 5% to positive 10% (model310) or positive 50% (model 350) grade in both axes. Just enter your slopes on the separate X and Y axis grade control pads, align and rough level the unit, set rotation speed and go to work. Slope control has never been this easy. Accurate steep-slope control has never been this possible!

Direct Entry Negative Slopes! Only the EAGL-3 lets you enter negative grade directly into the laser. For crown work, this means you no longer have to rotate and realign the laser. Just enter the desired negative grade. What was a 30 minute job now takes 30 seconds!
Long Range Beam and Battery Operation! The EAGL-3 utilizes the latest in laser technology - the visible laser diode - to give you the dual benefit of a long range beam and operation from an onboard, rechargeable battery pack. The 310 and 350 models lets you control a jobsite up to 915m (3000') in diameter from a single setup. The EAGL-310XR extends your control to 1220m diameter (4000'), a 75% increase in total area!